Reproduction Knobs At A Glance
Each row links to current listings.
Cast Resin Reproductions
About $11–$16 each typical
Turned Wood Reproductions
About $20–$45 each
3D-Printed Knobs And Pushbuttons
Varies by part
Reproduction Knob Kits
About $10–$25 per kit
Kinds Of Reproduction Knobs
- Cast resin. The most common kind. A mold is made from an original knob and copies are cast in resin, then colored to match Bakelite or Catalin. Good ones are hard to tell from originals on the radio.
- Turned wood. Hand-turned copies of 1930s wood knobs, usually in walnut. Zenith pinch knobs and shutter dial tuning knobs are the best-known examples.
- 3D printed. Newer, and best for parts that were never common enough to cast, like 1939 Zenith pushbuttons.
- Kits. Some makers sell a full set for a specific model, sometimes with the dial pointer or escutcheon included, like kits for the Philco PT-43 and PT-55.
Who Makes Reproduction Radio Knobs
These suppliers have long been recommended by collectors for reproduction knobs and parts:
- Renovated Radios — reproduction knobs, rubber mounts and Philco escutcheons, and also sells on eBay.
- Antique Electronic Supply — a general restoration supplier that carries some reproduction knobs and escutcheons.
- Mark Oppat's Old Radio Parts — reproduction knobs, including Philco knobs, and other parts.
- Big River Hardware — hand-turned walnut Zenith knobs and other wood knobs, sold on eBay, Reverb and Etsy.
Many smaller makers sell reproduction knobs for specific models on eBay, which is often the quickest way to find a knob for a less common radio.
Original Or Reproduction: Which To Buy
| Buy an original when… | Buy a reproduction when… |
|---|---|
| The radio is untouched and collector-grade | You plan to use or display the radio |
| You need just one knob to complete an original set | You need a full matching set |
| The original is reasonably priced | Originals are rare or very expensive |
| You plan to resell to serious collectors | Originals are cracked or badly worn |
Single original knobs for popular brands usually sell for $12 to $50 on eBay, while most reproductions cost $11 to $16. See our antique radio knobs guide for prices by brand.
Making Your Own
For common knobs, some collectors make their own copies. The usual method is to make a silicone mold from an original knob, then cast copies in a two-part resin, tinting the resin to match. A kit can make dozens of knobs, which makes it worthwhile if you restore several radios.
Old Time Replications
Old Time Replications, Larry Bordonaro's business in Van Nuys, California, made reproduction knobs and parts for vintage radios, and this site began as its home on the web. Larry passed away in 2015. See his Old Time Replications parts list and read more about Larry.
More Knob Guides
Sources
- Philco parts and knob resources, PhilcoRadio.com
- Vintage radio parts suppliers, PhilcoRadio.com
- Antique radio parts and repairs, AntiqueRadio.org
- Casting reproduction knobs, The PHILCO Phorum
- Recent eBay sold listings
Reproduction Knob FAQ
Do Reproduction Knobs Lower A Radio's Value?
On a top collector-grade radio, original knobs are worth more. On most radios, a correct matching set of good reproductions looks better and sells better than missing or mismatched originals.
How Can I Tell A Reproduction Knob From An Original?
Reproductions can be slightly lighter, the molded details can be softer, and the back may show resin or print lines instead of molded Bakelite. If in doubt, ask the seller.
Can I Make My Own Reproduction Knobs?
Yes. Some collectors make a silicone mold from an original knob and cast copies in two-part resin. It takes practice to match color and shine, but it works well for common knobs.
Who Made Old Time Replications Knobs?
Old Time Replications was Larry Bordonaro's reproduction knob and parts business in Van Nuys, California. Larry passed away in 2015.
Written by Ian Hart. Prices reviewed November 2026 from recent eBay sold listings. Ranges are typical sale prices, not appraisals.