Shop Philco Escutcheons And Knobs
Shop Philco Escutcheons And Knobs

Archive

Old Time Replications Parts List

Old Time Replications was Larry Bordonaro's reproduction parts business in Van Nuys, California, and this was its most-requested parts list. Larry passed away in 2015. We've kept his list here so collectors can still see what he made and which Philco models each part fits.

Reader-supported: we may earn a commission when you buy through links on this page.

Parts On The List

Each row links to current listings for the same part, original or reproduction.

1941 Philco Escutcheon

1941 models · Marbleized brown plastic

Fits 41-250, 255, 256, 280, 285, 287, 290, 296 and 610

1941 And 1942 Philco Knobs

1941–1942 models · Marbleized brown plastic

Fit the 1941 and 1942 models on this list and some later ones

1941 Philco Pushbuttons

1941 models · Wine red or brown, sets of eight

Fit the 1941 pushbutton models on this list

1942 Philco Escutcheon

1942 models, 9-pushbutton sets · Marbleized brown plastic

Fits 42-355, 355T, 380, 380X, 390 and 390X

1942 Philco Pushbuttons

1942 models · Marbleized brown plastic, sets of nine

Fit the 1942 9-pushbutton models above

About Old Time Replications

Larry Bordonaro started Old Time Replications in 1987 to reproduce knobs and parts for radios from the 1920s to the 1940s. Knobs and pushbuttons were most of the work. He also made plastic escutcheons, grilles, handles and other small plastic parts. Over the years he built up thousands of molds and added new ones every week.

Because there were so many parts, Old Time Replications never printed a catalog. The list below was its online list of the most-requested items, all for Philco radios. For everything else, collectors e-mailed Larry with the make and model of their radio, and a photo of the knob if it wasn't a Philco or Zenith. If he couldn't help, he referred them to someone who could.

1941 Philco Escutcheon

Reproduction 1941 Philco escutcheon in marbleized brown plastic by Old Time Replications

An injection-molded escutcheon in marbleized brown plastic, made to match the original. It fits Philco models 41-250, 41-255, 41-256, 41-280, 41-285, 41-287, 41-290, 41-296 and 41-610.

Shop 1941 Philco Escutcheons

1941 And 1942 Philco Knobs

Reproduction 1941 and 1942 Philco knob in marbleized brown plastic by Old Time Replications

These knobs were made from the same marbleized plastic as the escutcheons and sold in sets. The 1941 and 1942 knobs look the same from the front, but the 1941 knob has a larger shaft hole than the 1942 knob. They fit all the models listed for the escutcheons, and some later models too.

Shop 1941 And 1942 Philco Knobs

1941 Philco Pushbuttons

Reproduction 1941 Philco pushbuttons in translucent wine red and opaque brown by Old Time Replications

Sold in sets of eight, in either a translucent wine red (not marbleized) or an opaque brown.

Shop 1941 Philco Pushbuttons

1942 Philco Escutcheon

Reproduction 1942 Philco escutcheon for 9-pushbutton models by Old Time Replications

Another injection-molded escutcheon in marbleized brown plastic. This one is for the nine-pushbutton models only: 42-355, 42-355T, 42-380, 42-380X, 42-390 and 42-390X. It doesn't fit the ten-pushbutton models.

Shop 1942 Philco Escutcheons

1942 Philco Pushbuttons

Reproduction 1942 Philco pushbutton in marbleized brown plastic by Old Time Replications

Sold in sets of nine, in the same marbleized plastic as the 1942 escutcheon.

Shop 1942 Philco Pushbuttons

How Larry Made His Reproductions

Larry's notes for customers explain a lot about how good reproductions are made, and they still hold up:

  • Molds came from excellent originals. A mold copies every scratch and chip, so he only molded parts in excellent condition. If a collector sent a damaged part, he'd look for an existing mold made from a good original.
  • Molding didn't harm the original. His molding material cured without heat.
  • Escutcheons were Philco only. Philco radios were common enough to justify the molds; for other brands it wasn't worth it.
  • Wood-look knobs were plastic. He made simulated wood knobs from brown plastic wiped with a dark mixture to fill the grain. He advised ordering them as a full set, since they won't match original wood knobs side by side.
  • Buy full sets. Color-matching a single knob to an original set is slow and expensive. A complete set always matches.
  • Each knob came ready to fit, with a spring steel fastener or a set screw, just like the original.

Where To Find These Parts Now

You can still find originals and reproductions of these Philco parts. A few makers still offer reproduction Philco escutcheons and knobs, and original parts turn up on eBay regularly. See our guides to Philco radio knobs and reproduction radio knobs, or read more about Larry.

Shop Philco Radio Parts

Written by . Prices reviewed November 2026 from recent eBay sold listings. Ranges are typical sale prices, not appraisals.