Shop Radio Capacitor Kits
Shop Radio Capacitor Kits

Restoration Tool

Capacitor Code Decoder

Type the code printed on a capacitor and get its value in picofarads, nanofarads and microfarads. Below the decoder you'll find a chart of common codes, tolerance letters and voltage codes, and how to read the older markings on paper, mica and electrolytic capacitors in antique radios.

Reader-supported: we may earn a commission when you buy through links on this page.

Decode A Capacitor Code

Type the code printed on the capacitor, such as 103, 473K, 47J, 4R7, .05 or 22uF.

The value shows here in picofarads (pF), nanofarads (nF) and microfarads (µF).

Common Capacitor Codes

Code Picofarads (pF) Nanofarads (nF) Microfarads (µF)
101 100 0.1 0.0001
221 220 0.22 0.00022
471 470 0.47 0.00047
102 1,000 1 0.001
222 2,200 2.2 0.0022
472 4,700 4.7 0.0047
103 10,000 10 0.01
223 22,000 22 0.022
473 47,000 47 0.047
104 100,000 100 0.1
224 220,000 220 0.22
474 470,000 470 0.47
105 1,000,000 1,000 1

How To Read A Three-Digit Capacitor Code

Most small ceramic and film capacitors use a three-digit code. The first two digits are the value, and the third is the number of zeros to add. The result is in picofarads.

  • 103 = 10 + 000 = 10,000 pF = 0.01 µF
  • 472 = 47 + 00 = 4,700 pF = 0.0047 µF
  • 221 = 22 + 0 = 220 pF

A one- or two-digit number with no third digit, like 47 or 10, is simply the value in picofarads. An R marks a decimal point, so 4R7 is 4.7 pF.

Tolerance Letters

Letter Tolerance
B ±0.1 pF
C ±0.25 pF
D ±0.5 pF
F ±1%
G ±2%
J ±5%
K ±10%
M ±20%
Z +80% / −20%

Voltage Codes

Some capacitors print the voltage rating as a code. The most common:

Code Voltage
1H 50 V
2A 100 V
2D 200 V
2E 250 V
2G 400 V
2J 630 V

Many capacitors simply print the voltage, like "630V", "1KV" (1,000 volts) or "600 VDC". For a tube radio, replacement capacitors rated 600 or 630 volts are a safe choice for most positions.

Reading Capacitors In Old Radios

Paper And Wax Capacitors

The tubular paper capacitors in old radios are usually marked with the value in microfarads, like .05 MFD 400V or .01 600V. A decimal with no unit is in microfarads. These capacitors are the main reason old radios fail, and nearly all of them should be replaced during a restoration.

Electrolytic (Filter) Capacitors

Electrolytics are marked in microfarads and volts, like 20 MFD 150V, and are often grouped in a metal can with several sections. They smooth the power supply. Old electrolytics dry out and are always replaced. Observe the polarity: the negative side is marked.

Mica Capacitors

Small mica capacitors often use colored dots instead of printed numbers, and their values are in picofarads. On the common six-dot type, read the top row from left to right with the arrow: the first dot identifies the type, and the next two are the first two digits. Then read the bottom row from right to left: multiplier, tolerance and class. The digit colors are the standard color code: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, gray 8, white 9. Mica capacitors are very reliable and usually don't need replacing.

Ceramic Disc Capacitors

Postwar sets use ceramic discs marked with a three-digit code or a plain value, plus a voltage, like .01 1KV or 103. Ceramic discs rarely fail.

Replacing Capacitors

When you replace a capacitor, match the capacitance and use an equal or higher voltage rating. Modern film capacitors replace paper capacitors, and modern electrolytics replace the old filter capacitors. Many restorers buy a kit sized for their radio's chassis. See our guide to restoring an antique radio for the full process.

Shop Tube Radio Capacitor Kits

Capacitor Code FAQ

What Does 103 Mean On A Capacitor?

103 means 10 followed by 3 zeros, or 10,000 picofarads. That's 10 nanofarads, or 0.01 microfarads.

What Does 104 Mean On A Capacitor?

104 means 10 followed by 4 zeros, or 100,000 picofarads. That's 100 nanofarads, or 0.1 microfarads.

What Does The Letter After The Number Mean?

It's the tolerance. J means ±5%, K means ±10% and M means ±20%. So 473K is 0.047 µF ±10%.

What Does .05 Mean On An Old Capacitor?

On paper capacitors from old radios, a decimal value with no unit is in microfarads. A .05 capacitor is 0.05 µF, or 50 nF.

What Does MFD Mean?

MFD (or MF) is an old abbreviation for microfarads. A 0.1 MFD capacitor is 0.1 µF. Older parts also used "mmf" or "µµf" for picofarads.

Can I Replace A Capacitor With A Higher Voltage Rating?

Yes. A higher voltage rating is fine and often a good idea. The capacitance should match the original, within normal tolerance.

Written by . Prices reviewed November 2026 from recent eBay sold listings. Ranges are typical sale prices, not appraisals.