Zenith Knobs At A Glance
Each row links to current listings. The second button shows lots and sets, often the cheapest way to get a matching group.
1936–1937 Pinch Knobs
$19–$50 each typical
Shutter Dial And Black Dial Console Knobs
$19–$50 each typical
1939–1940 Pushbuttons And Console Knobs
$19–$50 each typical
Trans-Oceanic Knobs
$4–$20 each typical
Reproduction Zenith Knobs
About $12–$16 each typical; turned wood costs more
How Zenith Knobs Attach
Most Zenith knobs fit a 1/4 inch shaft, but Zenith used more than one attachment style:
- Push-on with a half-moon spring. Common on 1936 and 1937 pinch knobs. The shaft has one flat side, and a spring clip inside the knob holds it.
- Set screw on a round shaft. Used on many tuning knobs, including the broad tuning knobs on shutter dial sets.
- Small 1/8 inch shafts. Some 1940 consoles have a small knob that sits on top of the larger tuning knob on a 1/8 inch shaft, held with a set screw.
- Pushbuttons. Late-1930s and 1940 Zeniths often have rows of station pushbuttons, which push onto thin switch sliders.
1936–1937 Pinch Knobs
Zenith's "pinch" knobs have a narrow, gripped waist and a broad base. Many were turned from wood, and many carry a stamped "Z." They were used on many 1936 and 1937 Zeniths. To install one, push it on and turn it as far as it goes in one direction so its pointer lines up with the band markings on the cabinet.
Shutter Dial And Black Dial Console Knobs
The big black dial and shutter dial consoles from 1936 to 1940 use a large tuning knob and several smaller knobs for volume, tone and sensitivity. On 1938 and 1939 shutter dial sets, the tuning knob is broad and usually held with a set screw, and the smaller pinch knobs about 1/2 inch tall handle tone and sensitivity.
1939–1940 Pushbuttons And Console Knobs
Many 1939 Zeniths have a row of "hook" pushbuttons beside the dial: long buttons on one side and short ones on the other. If several are missing, check the switch they push onto, since it may be broken too. Some 1940 consoles use ivory knobs, including the small volume knob that sits on the tuning knob on a 1/8 inch shaft.
What Zenith Knobs Sell For
| Knob type | Typical sold price | Median |
|---|---|---|
| Single original Zenith knobs | $19–$50 | $25 |
| Lots and sets of Zenith knobs | $14–$62 | $32 |
| Trans-Oceanic knobs | $4–$20 | $9 |
| Reproduction Zenith knobs | $12–$16 | $13 |
These ranges come from recent eBay sold listings. Knobs for the Stratosphere, rare shutter dial models and complete original sets can sell for much more.
Reproduction Zenith Knobs
Reproduction Zenith knobs come in three main kinds: hand-turned walnut copies of the 1936–1939 wood knobs (including shutter dial tuning knobs and Z-logo pinch knobs), cast resin copies of Bakelite knobs, and 3D-printed pushbuttons for 1939 sets. Big River Hardware makes turned walnut Zenith knobs, and several makers sell 1939 hook pushbuttons. See our reproduction radio knobs guide for more.
Shop Reproduction Zenith Knobs
More Zenith And Knob Guides
Sources
- Reproduction 1937 Zenith pinch tuning knob, Big River Hardware on Reverb
- Reproduction 1938 Zenith shutter dial tuning knob, Big River Hardware on Reverb
- Zenith small pinch knob for shutter dial sets, Reverb
- Reproduction 1939 Zenith hook pushbuttons, Reverb
- 1940 Zenith console knob on a 1/8 inch shaft, Reverb
- Recent eBay sold listings
Zenith Knob FAQ
How Do Zenith Pinch Knobs Attach?
Most 1936 and 1937 Zenith pinch knobs push onto a 1/4 inch shaft with one flat side and are held by a half-moon spring clip. Push the knob on, then turn it as far as it goes so its pointer lines up with the band markings on the cabinet.
What Knobs Go On A Zenith Shutter Dial Radio?
Shutter dial sets from 1938 and 1939 use a broad tuning knob, usually held with a set screw on a 1/4 inch shaft, plus smaller pinch-style knobs for tone and sensitivity. Reproductions of both are available in turned walnut.
How Much Are Zenith Radio Knobs Worth?
Single original Zenith knobs usually sell for $19 to $50 on eBay. Trans-Oceanic knobs are much cheaper, often $4 to $20, because so many of those radios were made.
Can I Use Any Knob On A 1940 Zenith Console?
Check the shaft first. Some 1940 Zenith consoles use a small knob on a 1/8 inch shaft that sits on top of the larger tuning knob, so a standard 1/4 inch knob won't fit.
Written by Ian Hart. Prices reviewed November 2026 from recent eBay sold listings. Ranges are typical sale prices, not appraisals.